An Introduction to Automatic Fire Detection Systems

An Introduction to Automatic Fire Detection Systems

The procedures surrounding fire detection and the subsequent evacuation process in a commercial environment is just as important today as it always has been. What many people don’t realise is that these systems can also be employed in the home so that you aren’t reliant on a battery operated smoke detector.

Automatic fire detection systems don’t have to be complicated in their installation or use as we will show you in this article. If you aren’t already making use of one then now would be a good time to start.

Commercial Premises

Any commercial premises have to adhere to an entirely different set of regulations when it comes to fire safety. This is further defined by the type of premises you operate or inhabit with nursing homes and hotels having to conform to the most stringent of requirements. Any property where people will be in occupation overnight is deemed to be a higher risk.

An automatic fire detection has the ability to not only detect a fire but also actively employ fire suppression techniques.

With most systems, a series of smoke and heat detectors will be placed around a building at strategic locations. These detectors remain live and will constantly monitor the conditions present within any internal space.

Once an excessive amount of heat or smoke has been detected, signals are automatically sent to a central fire alarm panel to alert the responsible person to a potential problem. This panel will highlight exactly where the issue is so it can be investigated. Severe conditions such as flames will cause an alarm to sound immediately as a signal to evacuate the building.

An Introduction to Automatic Fire Detection Systems

In addition, fire suppression techniques can involve;

  • The deployment of water via a ceiling mounted sprinkler system which can effectively fight fire
  • The deployment of CO2 from ductwork which can nullify and extinguish fire
  • The deployment of foam in areas where electrical fires are likely

Within the Home

Within larger homes especially, an automatic fire detection system is a worthwhile investment. The audible alarm is much louder than a battery operated smoke detector providing the ability to notify all of the house’s occupants.

A fire alarm panel will also show you which room the fire has started in giving you the ability to avoid it during your evacuation. A fire alarm system can also be installed and programmed to notify the emergency services in the event of a fire, making any rescue effort much more responsive.

Maintenance and Inspections

To ensure optimal performance, fire detection systems do need to be tested on a routine basis. In any commercial premises, this will usually take place weekly with it being up to the homeowner in domestic environments.

Commercial premises will also need an annual or bi-annual inspection from a qualified specialist to satisfy legal obligations.

If you would like an automatic fire detection system installed or your existing system maintained, you should get in touch with an electrical contractor. Electrical services in Walsall, Birmingham and surrounding areas can be carried out by a competent contractor. If required, they will also be able to advise you on general fire safety procedures helping you to better manage your workplace or homes safety.

The benefits of automatic fire detection are too great to ignore so consider upgrading your existing system today.